- Home
- Categories
- Solar Solutions
- Battery Management System BMS 12/200
Description
This all-in-one Battery Management System, Current Limiter, Battery Combiner and Battery Protector is a robust and compact solution, specifically designed for 12V systems with 12V alternators, such as vehicles and boats.
The BMS 12/200 monitors and protects each individual battery cell within the battery (or battery bank) and will disconnect the alternator, charge sources or DC loads in case of low battery voltage, high battery voltage or over temperature.
The dedicated alternator connection provides current limiting and one-way traffic from the alternator into the battery, this so any size alternator (and start battery) can be safely connected to the Smart Lithium battery or batteries and the starter battery is protected from excessive discharge.
The dedicated load connection will disconnect loads and charge in case of low battery voltage, high battery voltage or over temperature. The BMS is also equipped with a remote on off connector, to turn the BMS (and the system) off via a remote switch.
Dimensions
Manual
Similar products
Check out other products from this category
Maxi GX
Solar SolutionsThe Maxi GX is a member of the GX Product family. The GX-device lies at the heart of the system - providing monitoring, and operating as the communication-centre of your installation. Compared to the other GX devices, the Maxi GX has most CPU power and most VE.Direct ports: 25. This is the GX device to use for large systems with many VE.Direct MPPT Solar Chargers.
Digital Multi Control 200/200A
Solar SolutionsThis panel is intended both for Multis and Quattros. It allows PowerControl and PowerAssist current limit setting for two AC sources: a generator and shore side current for example. Setting range: up to 200 Amps. The brightness of the LEDs is automatically reduced during night time.
Interface MK3-USB
Solar SolutionsThe MK3-USB allows the following products to connect to a computer for configuration and firmware updates: Multi, MultiGrid, MultiPlus, MultiPlus-II, Quattro, Inverter/Charger settings in ECOmulti, EasySolar, EasyPlus, and Inverters with a VE.Bus communication port.