- Home
- Categories
- Solar Solutions
- Interface 1140
Description
The assistant 'Use 1140 interface to set shore limit assistant' can be used in Multi(C) or a Quattro. It is connected just as a MK2 with use of an UTP cable. Remark: the unit must have firmware xxx2xx or higher in order to use assistants.
Manual
Similar products
Check out other products from this category
M8 circular connector Male/Female 3 pole cable 2m
Solar SolutionsM8 circular connector Male/Female 3 pole cable 2m (bag of 2)
MPPT WireBox - MC4
Solar SolutionsThe MPPT WireBox provides an extra level of safety, and is particularly useful if your MPPT Solar Charger is installed in a general access area.
Digital Multi Control 200/200A
Solar SolutionsThis panel is intended both for Multis and Quattros. It allows PowerControl and PowerAssist current limit setting for two AC sources: a generator and shore side current for example. Setting range: up to 200 Amps. The brightness of the LEDs is automatically reduced during night time.
Temperature Sensor for BlueSolar PWM-Pro
Solar SolutionsTemperature Sensor for BlueSolar PWM-Pro
Temperature sensor Quattro, MultiPlus and GX Device
Solar SolutionsTemperature sensor for Quattro, MultiPlus and GX Device.