- Home
- Categories
- Solar Solutions
- VE.Direct TX digital output cable
Description
Lighting Applications
The cable is designed for lighting applications in solar energy systems. Energy consumption can be significantly reduced by the ability to dim lighting when needed. Lower power consumption will reduce the overall system cost. Also, the availability of the lighting will increase, even in case of a partially charged battery in low sun. The cable connects the TX output of the VE.Direct connector of a MPPT charger with the PWM dimmer input of the LED driver.
Virtual load output
The cable is designed for adding load output functionality to the larger MPPT chargers (MPPT 100/30 and larger) that do not have a load output. The cable connects the TX output of the VE.Direct connector of a MPPT charger with a battery protect or a solid state relay to switch a load on or off.
Similar products
Check out other products from this category
RS232 to USB converter
Solar SolutionsRS232 to USB converter
Wall mount enclosure for BMV or MPPT Control
Solar SolutionsEasily mount a BMV-700 series or MPPT Control on a wall.
Cerbo GX
Solar SolutionsPanels and system monitoring
Maxi GX
Solar SolutionsThe Maxi GX is a member of the GX Product family. The GX-device lies at the heart of the system - providing monitoring, and operating as the communication-centre of your installation. Compared to the other GX devices, the Maxi GX has most CPU power and most VE.Direct ports: 25. This is the GX device to use for large systems with many VE.Direct MPPT Solar Chargers.
Orion-Tr DC-DC Charger Isolated remote cable
Solar SolutionsIn the Orion-Tr Isolated DC-DC Chargers the remote on/off circuit is referenced to the primary battery (e.g. starter battery). The Orion-Tr DC-DC Charger Isolated remote cable is intended for applications where the remote on/off signal is referenced to the secondary battery (e.g. lithium battery with BMS).