- Home
- Categories
- Solar Solutions
- Lithium battery 12,8V & 25,6V Smart
Description
Requires one of these BMS-es:
- VE.Bus BMS – recommended for systems with our inverter/chargers.
- miniBMS – recommend for use in small systems.
- Battery Management System BMS 12/200 – recommend for use in Automotive and Marine systems having DC-loads and Alternators.
- Smart BMS CL 12/100 – recommended for use in Automotive and Marine systems having DC-loads and Alternators.
Similar products
Check out other products from this category
Battery Balancer
Solar SolutionsThe Battery Balancer equalizes the state of charge of two series connected 12V batteries, or of several parallel strings of series connected batteries.
Temperature sensor type C
Solar SolutionsSpare battery temperature sensor for the Inverter RS Smart Solar.
Interface MK3-USB
Solar SolutionsThe MK3-USB allows the following products to connect to a computer for configuration and firmware updates: Multi, MultiGrid, MultiPlus, MultiPlus-II, Quattro, Inverter/Charger settings in ECOmulti, EasySolar, EasyPlus, and Inverters with a VE.Bus communication port.
Non inverting remote on-off cable
Solar SolutionsUse this cable to connect the following products to the VE.Bus BMS:
- Skylla-TG all models
- Battery Protect models BP40i, BP60i and BP200i (all discontinued).
VE.Can Power Cable
Solar SolutionsWhen the CAN bus is not powered by a Skylla-I or a MPPT, you will need the new VE.Can Power Cable to supply the power.