- Home
- Categories
- Solar Solutions
- VE.Direct to VE.CAN interface
Description
The VE.Direct to VE.CAN interface cable can be used to make BMV-700 information available on a VE.Can network. Where it can be read by a Color Control GX for example.
Limitations:
- The interface cable does not work with other VE.Direct products, such as Solar Chargers, Inverters and the BMV-712 Smart.
- When used in combination with a BMV-702 there is limited functionality with regards to the AUX function in the BMV: When used to measure starter battery voltage, that voltage will be transmitted to VE.Can. But when used to measure temperature and or mid-voltage, that data will not be transmitted on the VE.Can network.
DEPRECATED: this interface cable is deprecated. Use a GX Device instead, it provides more and better functionality. More detailed information in this NMEA2000 chapter.
Manual
Similar products
Check out other products from this category
BlueSolar MPPT 150/35 up to 150/70
Solar SolutionsSolar charge controller
smallBMS with pre-alarm
Solar SolutionsA simple and low cost alternative to the VE.Bus BMS
VE.Direct to NMEA2000 interface
Solar SolutionsThis NMEA2000 drop cable makes the BMV-700 information available to NMEA2000 networks.
Phoenix Smart IP43 Charger
Solar SolutionsWith boat owners in mind this adaptive 5-step charger can provide either 30A or 50A of charge to each of three battery banks.
Isolation Transformers
Solar SolutionsIndispensable in professional marine energy systems.